This file: ftp://monitor.mikes.fi/GNSS/MI05/MI05_info.txt Information about VTT MIKES time-transfer receiver MI05. Last update: AW, 2019-11-18, 2019-12-16, 2023-11-29 Receiver (MIKES 012946) info: - Septentrio PolaRx5TR-3046486 (MI05) - Firmware version 5.2.0 - Antenna config: "TWIVP6050_CONE NONE" (from 2019-11-18, DOY=211.19) Antenna (MIKES 012945) info: - Tallysman VeraPhase, model VP6050C, S/N VP6050C1901240012 - TNC-to-N converter: Huber Suchner 33_TNC-N-50-1/133_UE, Farnell 2857927 - 1st antenna cable (outdoor): 18m, Phoenix Contact art no. 2867380, Digikey 277-2965-ND - Surge-protector: PolyPhaser DGXJ-15NFNF-A - 2nd antenna cable (indoor): 6m, Phoenix Contact 5606125, Digikey 277-2955-ND - Antenna cable delay measured as 96.2(1) ns (CAB_DLY) Current Cal_ID: 1019-2023 Summary https://webtai.bipm.org/ftp/pub/tai/publication/time-calibration/Current/1019-2023_GPSP3-GALE3_VTT_V1-0.pdf Report https://webtai.bipm.org/ftp/pub/tai/publication/gnss-calibration/group2/2023/1019-2023/PTB_Report_1019-2023_VTT_V1-2.pdf INT DLY(P1) 19.1 ns (u_cal_P1 1.0 ns) INT DLY(P2) 18.4 ns (u_cal_P2 1.0 ns) INT DLY(E1) 21.6 (1.1) ns INT DLY(E5a) 20.9 (1.1) ns In use after 2023-11-29 (MJD 60277) REFDLY (Refenrece Delay): - 1m RG58 BNC-BNC cable from 1PPS distribution amplifier - delay measured 2019-12-16, 5.092(21) ns (REF_DLY) Data Output: - 24 h files, 30 s interval. - All enabled GNSS systems - RINEX v2.xx: ftp://monitor.mikes.fi/GNSS/MI05/RINEX_v2_24h/ - RINEX v3.03: ftp://monitor.mikes.fi/GNSS/MI05/RINEX_v3_24h/ ******************************************** old calibration, not used after 2023-11-29 ******************************************** Current Cal_ID: 1016-2019 https://webtai.bipm.org/ftp/pub/tai/publication/gnss-calibration/group2/2019/1016-2019/ptb_g1g2_1016_2019_calibration_report_v1.0.pdf INT DLY(L1C) 22.72 ns (u_cal_L1C 1.03 ns) INT DLY(P1) 20.17 ns (u_cal_P1 1.01 ns) INT DLY(P2) 18.18 ns (u_cal_P2 1.03 ns) INT DLY(E1) 22.00 (1.01) ns INT DLY(E5a) 20.07 (1.01) ns ********************************************